Toyota SIENNA 2022 Manual page 492

492
7-2. Steps to take in an emergency
first one loosened.
1
Place the wheel lock key on
top of the wheel lock nut,
turning until the wheel lock
key and wheel lock nut pat-
terns engage.
2
Place the wheel nut wrench
on the wheel lock key, and
while applying pressure on
the wheel lock key, loosen
the wheel lock nut.
Installation
■
For ease of installation, the
wheel lock nut should always be
the last one tightened.
1
By hand, install a wheel lock
nut on each wheel.
2
Place the wheel lock key on
top of the wheel lock nut,
turning until the wheel lock
key and wheel lock nut pat-
terns engage.
3
Place the wheel nut wrench
on the wheel lock key, and
while applying pressure on
the wheel lock key, tighten
the wheel lock nut to the rec-
ommended torque.
NOTICE
■ Wheel lock nut
Do not use an impact wrench.
Using an impact wrench may
cause permanent damage to
wheel lock nut and wheel lock
key. If in doubt about wheel lock
application, contact your Toyota
dealer.
Taking out the jack
1
Pull the handle upward.
2
Take out the jack.
Do not touch the threaded portion
of the jack as it is greased.
Taking out the tools
1
Remove the cover.