Save User Map - JRC JMA-7133-SA Instruction Manual

3.6.4.2 Restoring the corrected user map to its original state (Shift Clear)
Procedures
Open the Mark Operations menu by performing the following
1)
menu operation.
Only the most recently corrected data (for a single input) will be cleared, and the data will be
displayed at its original position.
At this time, Map Shift is not displayed in the map position correction (lower right of the
display).
3.6.5

Save User Map

3.6.5.1 Loading navigation data (Load User Map)
Procedures
1) Insert a flash memory card into the card slot.
Flash memory card (option) is necessary.
2) Open the File Operations menu by performing the following
menu operation.
3) Left-click the item button of
card slot.
Slot1 and Slot2 of the Select Card Slot items are switched.
4) Left-click the item button of
Add
Add
When [Add] is selected, new data is added to the savedd data. When [Overwrite] is selected,
the saved data is overwritten.
JMA-7100 Instruction Manual
U.Map
→ 4. Shift Clear
Map Shift : Heading correction is conducted
Map Shift : Heading correction is not conducted
U.Map
→ 7. File Operation
/
Overwrite
Overwrite
and
3－ 61
> >
3.BASIC OPERATION 3.6 DISPLAY USER MAP
1. Select Card Slot
2. Load Mode
.
of the Load Mode items are switched.
and select the
and select
3