3.4
GENERAL RADAR OPERATION
3.4.1
Interference Rejection (IR)
Interference by other radars is rejected.
• When viewing a radar beacon or SART signal, select
Procedures
1)
Left-click the IR button located at the lower left of the radar
display.
The interference rejection modes are switched.
IR Off
Rejection levels of the interference rejector
When a high interference rejection level is selected, the radar's ability of
detecting small targets such as buoys and small boats lowers.
In general,
>
JMA-7100 Instruction Manual
3.BASIC OPERATION
Attention
IR Off
(Interference Rejector OFF) because IR
processing suppresses the video.
→
IR Low
→
IR Off : Interference rejector off
IR Low : Interference rejection level - low
IR Middle : Interference rejection level - moderate
IR High : Interference rejection level - high
IR Low
should be selected.
3- 23
>
3.4 GENERAL RADAR OPERATION
IR Meddle
→
IR High
→
IR Off
3