JRC JMA-7133-SA Instruction Manual page 243

3.11.1.1 Copy Internal Information to Card (Copy Internal -> Card)
Procedures
While the File Manager window is open, left-click the device 1
1)
selection button.
Selected items for Device1 will be displayed.
2) Left-click the
Internal is selected.
3) Left-click the device 2 selection button.
Selected items for Device2 will be displayed.
4) Left-click button corresponding to the device to which data is to
be copied.
The list of files saved in the selected device will be displayed.
Put the cursor on the data to be copied, and Left-click button.
5)
Left-click button one more time will cancel the selection.
6) Left-click the
The character input screen for the Input File Name menu will appear.
Enter the file name to be saved.
7)
Up to 10 characters can be entered.For the input method on the character input screen, see
Section 3.3.4.7 "Entering a character".
After the data has been entered, Confirmation Window will appear.
Left-click the
8)
The entered name is written into the selected device as a file name.
Up to the maximum number of items, described on the previous page, can be saved in the
device. With regard to the capacity for saving data, data can be saved on a flash memory card
as a file, and those files can be saved until the flash memory card is full.
>
JMA-7100 Instruction Manual
button among the selection items.
1. Internal
button.
COPY
button.
1. Yes
3 －123
>
3.BASIC OPERATION 3.11 USING CARD
3