JRC JMA-7133-SA Instruction Manual page 193

3) On the radar display, put the cursor on a Waypoint to be deleted,
and left-click.
The specified Waypoint is deleted, and the previous and following Waypoints are then
connected by a line.
4) To delete another Waypoint, repeat procedure 3.
5) To finish deleting a Waypoint, left-click the
button.
The Waypoint deleting mode will be cancelled.
(Example)
000
113T
8.00kn
000
113T
8.00kn
Calculated again
3.7.2.6 Inserting a Waypoint (Insert Waypoint)
A Waypoint is inserted at a specific location of the route data saved in the radar system.
Procedures
1) Open the Set Route Sequence menu by performing the menu
operation below.
JMA-7100 Instruction Manual
002
064T
9.00kn 10.0kn
001
Left-click
090T
001
10.0kn
Waypoints are re-numbered.
Route
→ 2. WPT/Route Setting
→ 3. Set Route Sequence
3－ 73
> >
3.BASIC OPERATION 3.7 USE ROUTE FUNCTION
5. Delete
Waypoint to be deleted
004
113T 064T
11.0kn
12.0kn
003
Planned speed
003
064T
11.0kn
12.0kn
002
113T
005
113T
004
3