JRC JMA-7133-SA Instruction Manual page 377

4) Click the item button corresponding to the item to be changed.
The item is switched.
Acknowledge State
7.2.9.6 Setting the Alarm Buzzer (Sound Output Mode)
This function enables the control of alarm buzzer.
Procedures
1) Open the Serviceman Menu.
2) Perform the following menu open procedure to open the External
ACK Setting menu.
3) Select the function to be used.
Setting and Ararm Function
Alarm Setting
On
Off1
Off2
① : Followed by Buzzer Volume menu setting.
② : Alarm Buzzer is turned off.
③ : If Relay Output menu is turned on when Alam Buzzer is turned off. If Relay Output menu is turned off when Alam
Buzzer is turned on.
For how to setting Buzzer Volume menu, see Section 3.8.6 "Adjust Sound Volume (Buzzer Volume)".
>
JMA-7100 Instruction Manual
: Setting of alarm sound.
Audio
→ On
→
Off
: Setting of alarm indication.
Indication
→ Lightning
→
Brinking
: Setting of ALR sentence.
A;ACK
→
→
V;UNACK
2. Installation Menu
→
6. Alarm System
→ 4. Sound Output Mode
, and
On Off1
Operation Operation
CPA/
Miss
TCPA
①
①
7－ 25
7.SETTINGS FOR SYSTEM OPERATION
: The alarm sound is not stopped when
acknowridgement have received.
: The alarm sound
acknowridgement have received.
: The alarm indication brinking is stopped when
acknowridgement have received.
: The alarm indication brinking is not stopped
when acknowridgement have received.。
: Add acknowridgement to ALR sentence.
: Add no acknowridgement (unrecognized) to ALR
sentence.
Off2
Lost NAV
New
Target
①
②
③ ①
>
7.2 SETTINGS
is stopped when
System ISW
② ①
7