JRC JMA-7133-SA Instruction Manual page 437

JMA-7100 Instruction Manual
6) Insert the flat tip nonconductive sscrewdriver
for adjustment or some stick to the location
shown in the figure below and slide the battery
sideways to remove the battery.
[Assembly]
1) Check the polarity of the battery. Make sure that
the battery's positive (+) side is facing up.
2) Slide the battery sideways into the battery
holder.
3) Make sure that the battery is inserted fully.
>
8.COUNTERMEASURE FOR TROUBLE ...
8－ 39
>
8.4 REPLACEMENT OF MAJOR PARTS
8