JRC JMA-7133-SA Instruction Manual page 178

>
JMA-7100 Instruction Manual 3.BASIC OPERATION
The cursor mode changes to the normal operation mode, terminating the user map
insertion/correction mode.
(Example)
3.6.3.6 Deleting a mark or vertex from a line (Delete Vertex)
With regard to the created user map, a vertex is deleted individually from a mark or line.
Procedures
1) Open the Edit User Map menu by performing the following menu
operation.
The Edit User Map menu will appear.
2) Left-click the
The user map delete mode is selected.
Delete
Put the cursor on the vertex of a mark or line, and left-click.
3)
The selected mark or vertex of the line is deleted.
All of the lines drawn by joining two points are deleted.
To delete another mark or vertex of a line, repeat procedure 3.
4) When finished with the correction of all items, left-click the
0.Exit
>
3.6 DISPLAY USER MAP
Original vertex
New vertex
U.Map
→ 2. Edit User Map
6. Delete Vertex
is displayed in the cursor mode located at the upper right of the radar display.
button.
3－ 58
button.