JRC JMA-7133-SA Instruction Manual page 300

>
JMA-7100 Instruction Manual 5.OPERATION OF TARGET TRACKING AND AIS
5.2.7.4 Gate Display
The gate displays an area monitoring a target using the Target Tracking function.
This radar equipment allows the gate size to change automatically according to
target range and size. User can check the gate size using the following function.
Procedures
1) Open the TT Test Menu by performing the following menu
operation.
TT
2) Left-click the item button of
The gate display mode is switched.
3) Display the numeric value of a target according to Section 5.2.3
"Tracked Target Data Display [TGT DATA]" .
The numeric value of the target will be displayed, and the tracked target symbol will be
enclosed in a green gate.
→
9. TT Test Menu
: Gate is displayed
On
: Gate is not displayed
Off
The Target Tracking can display the gate of two targets
i
simultaneously.
Tracked Target symbol
Echo
5－ 26
>
5.2 TARGET TRACKING OPERATION
.
4. Gate Display
Vector
Gate (displayed in green )