JRC JMA-7133-SA Instruction Manual page 286

>
JMA-7100 Instruction Manual 5.OPERATION OF TARGET TRACKING AND AIS
5.1.4.3 Operation of AUTO Mode
As shown below, the AUTO mode performs operation in accordance with the
object at the cursor position when left-clicked.
The AUTO mode permits to access that you want by intuitive operation.
Object at Cursor Position
None
EBL
VRM
Intersection point of EBL
and VRM
Parallel index line
Tracked target
Tracked target with
numeric data displayed
Sleeping AIS target
Activated AIS target
AIS target with numeric
data displayed
Automatic acquisition /
activation zone
AIS filter
>
5.1 PREPARATION
Operation
Acquires a target.
EBL operation.
VRM operation.
Performs EBL operation and VRM operation at
the same time.
Operates the parallel index line.
Displays the numeric data of the tracked target.
Hides the numeric data.
Activates the AIS target.
Displays the AIS target information.
Hides the AIS target information.
Operates the automatic acquisition / activation
zone.
Operates the AIS filter zone.
5－ 12