Attaching The Rackmount Brackets - Cabletron Systems CSX200 CyberSWITCH Installation Manual

Attaching the Rackmount Brackets

Refer to Figure 4-7, below, and proceed as follows to attach the rackmount brackets:
• Locate the four 8-32 x 1/4-inch screws and the two rackmount brackets in the
CSX200-ACCY-KIT package.
• Using the four 8-32 x 1/4-inch screws, attach the rackmount brackets to the bottom of the
CSX200 as shown in
CSX200 Installation Guide
Figure 4-6 Attaching the Strain-Relief Bracket
Figure 4-7, below.
Rackmount
Brackets (2)
Screws (4)
Figure 4-7 Installing the Rackmount Brackets
Rackmount Installation
2012_08
2012_09
4-9