Wpim-E1; Wpim-Di; Wpim-Hdsl - Cabletron Systems CSX200 CyberSWITCH Installation Manual

Appendix B: Specifications and Standards Compliance

WPIM-E1

This section describes the environmental specifications and safety and approval requirements for
the WPIM-E1.
This unit meets the safety requirements of EN 60950, IEC 950, 73/23/EEC and
Safety —
AS/NZS 3260.
Electromagnetic Compatibility (EMC) —
EN 50082-1, AS/NZS 3548, and 89/336/EEC.
91/263/EEC, CTR 12, TS 001, and TS 016.
TELECOM —

WPIM-DI

This section describes the environmental specifications and safety and approval requirements for
the WPIM-DI.
This unit meets the safety requirements of UL1950, and CSA C22.2 No. 950.
Safety —
Electromagnetic Compatibility (EMC) —
15, VCCI V-3, and CSA108.8.
TELECOM — The WPIM-DI meets FCC Part 68 and CS-03.

WPIM-HDSL

This section describes the environmental specifications and safety and approval requirements for
the WPIM-HDSL.
This unit meets the safety requirements of UC1950, CSA 22.2 No. 950, EN 60950,
Safety —
IEC 950 73/23/EEC.
Electromagnetic Compatibility (EMC) —
Part 15, EN 55022, VCCI V-3, CSA/08.8 EN 50082-1, AS/NZS 3548, 89/336/EEC.
NEBS — This unit meets a minimum of Level 1 NEBS requirements in accordance with Bellcore
GR 1089.
B-4
This unit meets the EMI requirements of EN 55022,
This unit meets the EMI requirements of FCC Part
This unit meets the EMC requirements of FCC
CSX200 Installation Guide