Installing a WPIM
Before performing installation procedures, ensure that the requirements outlined in the
!
section,
Tabletop and Shelf Installations
CAUTION
When removing an existing WPIM, make sure to pull the module straight out to avoid
!
damaging the connector.
CAUTION
To install a WPIM into the CSX200, refer to
CSX200 Installation Guide
Chassis Cover
Chassis
Figure 4-1 Removing the Plastic Chassis Cover
Figure 4-2
Installation Guidelines
on page 4-6, are met.
on the following page.
Cover Screw (1)
979-01
4-3