Cabletron Systems CSX200 CyberSWITCH Installation Manual page 27

Cabletron systems installation guide cyberswitch csx200
Hide thumbs Also See for CSX200 CyberSWITCH:
Table of Contents

Advertisement

Frame Relay DTE MIB RFC1490
Security MIB RFC1472 (CCP, PAP, and CHAP)
RS-232 MIB RFC1317
LQM MIB RFC1989
PPP MP MIB RFC1990
Frame Relay Multi Protocol Encapsulation MIB RFC1490
SNMP Trap Support
SNMP Traps are notifications of network events sent by an SNMP-compliant device to an SNMP
management station.
TheCSX200 supports the following SNMP IETF Standard Traps:
Warm Start Trap Type Code #1 RFC1214
Bridge New Root Trap Type Code #1 RFC1493
Bridge Topology Change Trap Type Code #2 RFC1493
Cabletron Enterprise Traps include:
Port Segmented Trap Type Code #257(0x101) rrev4-mib
Port Operational Trap Type Code #258(0x102) rrev4-mib
Port Link Up Trap Type Code #259(0x103) rrev4-mib
Port Link Down Trap Type Code #260(0x106) rrev4-mib
Environmental Temperature Hot Trap Type Code #282(0x11A) rrev4-mib
Environmental Temperature Normal Trap Type Code #284(0x11C) rrev4-mib
IP Event Log Change Trap Type Code #1280(0x500) ctip-mib
The following is a list of IP Events that are logged, and that create the IP Event Log Change Trap.
IP Routing has been disabled on interface #
IP Routing has been enabled on interface #
IP Forwarding has been enabled on interface #
IP MTU size has been changed on interface #
IP Framing Type has been changed on interface #
CSX200 Installation Guide
CSX200 Firmware Support
2-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cyberswitch csx201Cyberswitch csx202Cyberswitch csx203

Table of Contents

Save Article as PDF