Command 0Xa1 - Access Emv Tags - Magtek DynaPro Mini Programmer's Manual

3 - Command Set

3.6.2 Command 0xA1 - Access EMV Tags

This command gives the host access to slots on the device which store one or more EMV tags that drive
the device's EMV kernel configurations. The set of available configuration tags combines multiple
sources:

The EMV specification, EMV Integrated Circuit Card Specifications for Payment Systems v4.3.

The MagTek custom tags listed in Appendix D MagTek Custom EMV Tags (for example, the host
can assign the database of EMV tags a label using tag DFDF26, and read the checksum back using
tag DFDF27);
DynaPro Mini| PIN Encryption Device | Programmer's Manual (Commands)
Page 69 of 128 (D99875629-43)