Magtek DynaPro Mini Programmer's Manual page 38

3 - Command Set
Table 3-9 - Usage Table for Command 0x09 (Set mode) / Response for Command 0x09 (Get mode)
Bit 7
Byte 0 0x09
Device Control (default value = 0x00)
Bit 0 Require Authentication:
0 = No
1 = Yes
Bit 1 MSR Encryption Variant:
0 = PIN
1 = DATA
Bit 2 Reserved
Bit 3 Reserved
Byte 1 Bit 4 iPod Accessory Protocol (iAP) Config Allowed: (30-pin Only)
Allows configuration of Reverse DNS and Bundleseed ID when unlocked
0 = Unlocked
1 = Locked
Bit 4 Reserved
Bit 5 Reserved
Bit 6 Reserved
Bit 7 Configuration Lock (NOTE: After locking, unlocking can only be performed by the
manufacturer):
0 = Unlocked
1 = Locked
DynaPro Mini| PIN Encryption Device | Programmer's Manual (Commands)
6 5
Page 38 of 128 (D99875629-43)
4 3 2 1 0