High Speed Interface Configuration Screen - Cabletron Systems SmartSwitch 2H22 Supplemental Manual

1.9 HIGH SPEED INTERFACE CONFIGURATION
SCREEN
The High Speed Interface Configuration screen,
NOTE
applies only to installed optional Fast Ethernet Interface
Modules. This screen supports the FE-100TX, FE-100FX,
FE-100F3, and FE-100LH Fast Ethernet Interface Modules that
operate at 100 Mbps.
The High Speed Interface Configuration screen displays the types of
installed Fast Ethernet Interface Modules, their current operating mode,
and indicates if the ports are linked. This screen also allows the user to
enable or disable Auto-Negotiation and set the Advertised Ability.
To access the High Speed Interface Configuration screen from the High
Speed Interface Configuration Menu screen, use the arrow keys to
highlight the FAST ETHERNET INTERFACES menu item and press
ENTER. The High Speed Interface Configuration screen displays.
Port Type
Link Status
Current Oper. Mode
Desired Oper. Mode
Advertised Ability
SAVE
Figure 1-10 High Speed Interface Configuration Screen
Local Management Supplement
High Speed Interface Configuration Screen
Port 25
FE-100TX
Link
100Base-TXFD
[Auto-Negotiation]
[100Base-TXFD] [Disabled]
EXIT
Figure 1-10,
Port 26
Unknown
N/A
[N/A]
[N/A]
[N/A]
RETURN
19601-24
1-21