Gmrp Configuration Screen - Cabletron Systems SmartSwitch 2H22 Supplemental Manual

3. Press ENTER.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
5. Press ENTER. The message "SAVED OK" displays.
4.4

GMRP CONFIGURATION SCREEN

The GMRP Configuration screen,
operation mode of each port.
To access the GMRP Configuration screen, use the arrow keys to
highlight the GMRP GROUP REGISTRATIONS menu item on the
802.1 Configuration Menu screen and press ENTER. The GMRP
Configuration screen displays.
Port #
1 [Use GMRP Filter Unreg]
2 [Use GMRP Filter Unreg]
3 [Use GMRP Filter Unreg]
4 [Use GMRP Filter Unreg]
5 [Use GMRP Filter Unreg]
6 [Use GMRP Filter Unreg]
7 [Use GMRP Filter Unreg]
8 [Use GMRP Filter Unreg]
9 [Use GMRP Filter Unreg]
10
[Use GMRP Filter Unreg]
11 [Use GMRP Filter Unreg]
12 [Use GMRP Filter Unreg]
SAVE
The following describes the screen fields.
Port # (Read-Only)
Displays the number of the front panel interface.
Local Management Supplement
Mode
Set All Ports:
Figure 4-3 GMRP Configuration Screen
GMRP Configuration Screen
Figure 4-3, is used to set the GMRP
Port #
[Use GMRP Filter Unreg]
13
[Use GMRP Filter Unreg]
14
[Use GMRP Filter Unreg]
15
[Use GMRP Filter Unreg]
16
[Use GMRP Filter Unreg]
17
[Use GMRP Filter Unreg]
18
19 [Use GMRP Filter Unreg]
20 [Use GMRP Filter Unreg]
[Use GMRP Filter Unreg]
21
22 [Use GMRP Filter Unreg]
23 [Use GMRP Filter Unreg]
24 [Use GMRP Filter Unreg]
[Forward All Groups]
NEXT
Mode
EXIT RETURN
2762-34
4-7