Table of Contents
Advertisement
Chapter 1: Changes to Local Management Screens
1.16
SWITCH CONFIGURATION SCREEN
The Switch Configuration screen,
options to make a switch operational in your network.
To access the Switch Configuration screen from the 802.1 Configuration
Menu screen, use the arrow keys to highlight the SWITCH
CONFIGURATION menu item and press ENTER.
Switch Address: 00-00-1D-00-00-00
Number of Ports:
Port #
1
2
3
4
5
6
7
8
SAVE
The following describes each field of the Switch Configuration screen:
Switch Address (Read-Only)
Displays the MAC address of the SmartSwitch device.
Number of Ports (Read-Only)
Displays the total number of switched ports on the SmartSwitch device.
Type of STA (Toggle)
Allows the user to set the method that the switches use to decide which
switch is the controlling (Root) switch when two or more switches exist in
parallel (Spanning Tree Algorithm). Valid entries include IEEE, DEC, and
NONE. To set the STA, refer to
1-40
27
MAC Address
00-00-1D-00-00-00
00-00-1D-00-00-01
00-00-1D-00-00-02
00-00-1D-00-00-03
00-00-1D-00-00-04
00-00-1D-00-00-05
00-00-1D-00-00-06
00-00-1D-00-00-07
EXIT
Figure 1-16 Switch Configuration Screen
Section
Figure
1-16, provides the basic setup
Type of STA:
Age Time (sec):
State
learning
listening
standby
learning
listening
standby
listening
listening
[9-16]
1.16.1.
Local Management Supplement
[DEC]
300
Status
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
[ENABLED]
[DISABLED]
RETURN
19601-18
Advertisement
Table of Contents
