Built-In Command - Cabletron Systems SmartSwitch 2H22 Supplemental Manual

Chapter 5: Network Tools
Welcome to Network Tools
-> help
Commands Available to the
Built in Commands:
bridge
arp
netstat ping
show traceroute
soft_reset
atm_stp_state cdp
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help <command>'.
->
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER. For detailed information, see the
applicable Local Management User's Guide.
5.1.1

Built-in Command

The built-in command listed in this section activates a new function on the
managed module being accessed through Network Tools.
5-2
defroute
reset
telnet
link_trap
stpStandby
Figure 5-1 Network Tools Help Screen
Local Management Supplement
090829