Super C9X299-PGF-L/-RPGF-L User's Manual
Motherboard Features
CPU
•
Supports a single Intel Core X-series processor family in an LGA2066 R4 type socket
Memory
•
Supports up to 256GB of unbuffered, non-ECC, DDR4 memory with speeds of up to 3000+MHz (OC)
Note 1: To safely overclock your system, make sure to use an overclocked processor. Also, memory modules
installed on the motherboard have an influence on the overclocking speed. Refer to
tings in the BIOS.
Note 2: 2933MHz or above is supported by Intel Core i9 10980XE/10940X/10920X/10900X series processor only.
DIMM Size
•
Up to 256GB at 1.2V
Note 1: Memory capacity and frequency is CPU dependent.
Note 2: 32GB is supported by Intel Core i9 10980XE/10940X/10920X/10900x series processor only.
Note 3: For the latest CPU/memory updates, please refer to our website at
motherboard.
Chipset
•
Intel PCH X299
Expansion Slots
•
Four CPU PCIe 3.0 x16 slots
•
One PCH PCIe 3.0 x1 slot
•
One M.2 PCIe 3.0 x4 connector, attached to PCH (M-Key 2280 and 22110)
•
One M.2 PCIe 3.0 x4 connector, attached to PCH (M-Key 2280)
•
Two U.2 PCIe 3.0 x4 connectors
Network
•
Intel I210-AT
I/O Devices
•
PS/2 Port
•
Serial (COM) Port
•
SATA 3.0
•
Video Port
Peripheral Devices
•
One USB 3.2 Gen 2 Type-C port on the rear I/O panel
•
Two USB 3.2 Gen 1 Type-A ports on the rear I/O panel
•
Three USB 3.2 Gen 2 Type-A ports on the rear I/O panel
•
One front accessible USB 3.2 Gen 1 header with two USB connections
•
Two front accessible USB 2.0 headers with four USB connections
Note: The table above is continued on the next page.
Motherboard Features
•
One PS/2 Keyboard/Mouse port on the rear I/O panel
•
One front accessible serial port header (JCOM1)
•
Six I-SATA 3.0 ports at 6 Gb/s (I-SATA0~5 with RAID 0, 1, 5, and 10)
•
One VGA on the rear I/O panel
16
Chapter 4
for overclocking set-
http://www.supermicro.com/products/