Supermicro C9X299-PGF-L User Manual page 84

Super C9X299-PGF-L/-RPGF-L User's Manual
Adjust Pll
Use this feature to adjust the PLL for Higher-BCLK ratio combination. The options are
Disable and Enable.
Change PllTrim Value
Enter a value for PllTrim. The range is negative 63 to positive 63. The default is 0.
Change PLLTRIM Prefix
Use this feature to set the PLLTRIM prefix value as a positive (+) or a negative (-). The
options are "+" and "-".
Change MC-PllTrim Value
Enter a value for MC-PllTrim. The range is negative 63 to positive 63. The default is 0.
Change MC-PLLTRIM Prefix
Use this feature to set the MC-PLLTRIM prefix value as a positive (+) or a negative (-).
The options are "+" and "-".
CLR/Ring
CLR Max OC Ratio
Enter a value for the maximum overclocking ratio of the CLR domain. The default is 0.
CLR Min Ratio
Enter a value for the minimum overclocking ratio of the CLR domain. The default is 8.
CLR Voltage Mode
This feature controls the CLR Voltage Mode. Adaptive Mode only allows for voltage in-
terpolation in turbo mode. Override Mode forces the selected voltage to be applied over
all operating frequencies. The options are Adaptive and Override.
*If the feature of
become available for configuration:
CLR Extra Turbo Voltage (mV)
This feature controls the extra turbo voltage applied while GT is operating in turbo mode.
The range is 0~2000 mV.
*When the feature of
will become available for configuration:
CLR Voltage Override (mV)
Enter a value for the CLR Voltage Override. The default is 0.
CLR Voltage Mode is set to Adaptive, the following feature will
CLR Voltage Mode
84
is set to Override, the following feature