Table of Contents
Advertisement
Chapter 4: UEFI BIOS
CPU SLOT3/SLOT5 Select
This feature selects between a combination of SLOT3/SLOT5 configuration or only SLOT5.
The options are CPU SLOT3 X8 SLOT5 X8 and CPU SLOT5 X16.
Onboard LAN1 Support
This feature enables or disables onboard LAN1. The options are Enabled and Disabled.
Onboard LAN Option ROM Type
Use this feature to select which type of firmware to be loaded for the onboard LAN port.
The options are Legacy and UEFI.
Onboard LAN1 Option ROM
Select Preboot Execution Environment (PXE) to boot the computer using a PXE device
installed in a LAN port specified. Select Disabled to prevent system boot using a device
installed in a LAN port. The options are Disabled and PXE.
Note: This feature is available when the
Onboard LAN1 Support
is set to Enabled.
Network Stack
Select Enabled to enable Preboot Execution Environment (PXE) or Unified Extensible
Firmware Interface (UEFI) for network stack support. The options are Enabled and Disabled.
*If the feature above is set to Enabled, the following features will become available
for configuration:
IPv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. If this feature is disabled, it will not create
the IPv4 PXE boot option. The options are Disabled and Enabled.
IPv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. If this feature is disabled, it will not
create the IPv4 HTTP boot option. The options are Disabled and Enabled.
IPv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. If this feature is disabled, it will not create
the IPv6 PXE boot option. The options are Disabled and Enabled.
IPv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. If this feature is disabled, it will not create
the IPv6 HTTP boot option. The options are Disabled and Enabled.
PXE boot wait time
Use this feature to set the wait time (in seconds) upon which the system BIOS will wait for
user to press the <ESC> key to abort PXE boot instead of proceeding with PXE boot by
connecting to a network server immediately. The default setting is 0.
107
Advertisement
Table of Contents
