Table of Contents
Advertisement
CLR Voltage Offset (mV)
This feature controls the offset voltage applied to the GT domain. The range is negative
100 to positive 1000 mV. The default is 0.
Offset Prefix
Use this feature to set the prefix value as a positive (+) or a negative (-). The options
are "+" and "-".
Uncore
Uncore Voltage Offset
Enter a value for the Uncore voltage offset (in millivolts). The value range is negative
1000 to positive 1000. The default is 128.
Offset Prefix
This feature controls whether the offset value prefix. The options are positive (+) or
negative (-).
SVID/FIVR
SVID Support
This feature enables SVID, which allows input voltage overrides. The options are Dis-
abled and Enabled.
*If the feature of
SVID Support
available for configuration:
SVID Voltage Override (mV)
Enter a value for the VCCIN input voltage. The range is 0~2500 mV. The default is 0.
SVID VCCSA Voltage (mV)
Enter a value for the VCCSA input voltage. The range is 0~2500 mV. The default is 0.
SVID VCCIO Voltage (mV)
Enter a value for the VCCIO input voltage. The range is 0~2500 mV. The default is 0.
*If the feature of
SVID Support
available for configuration:
VCCIN Support
User this feature to set the VCCIN support. The options are Disabled and Enabled.
is set to Enabled, the following features will become
is set to Disabled, the following features will become
85
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
