Supermicro C9X299-PGF-L User Manual page 104

Super C9X299-PGF-L/-RPGF-L User's Manual
This feature controls whether parity bits are sent with data bits in order to detect trans-
mission errors. The options are None, Even, Odd, Mark, and Space.
Stop Bits
This feature controls the amount of stop bits to send at the end of a data packet. Slow
devices may require more than one stop bit. The options are 1 or 2.
Flow Control
This feature can prevent data loss from buffer overflow. The options are None and
Hardware RTS/CTS.
VT-UTF8 Combo Key Support
This feature enables VT-UTF8 Combo Key support for ANSI/VT100 terminals. The op-
tions are Unchecked and Checked.
Recorder Mode
This feature enables only text to be sent across consoles. The options are Unchecked
and Checked.
Resolution 100x31
This feature enables extended terminal resolution. The options are Unchecked and
Checked.
Legacy OS Redirection Resolution
This feature controls the number of rows and columns supported by redirection on legacy
operating systems. The options are 80x24 and 80x25.
Putty KeyPad
This feature controls Putty KeyPad support. The options are VT100, LINUX, XTERMR6,
SCO, ESCN, and VT400.
Redirection After BIOS POST
This feature controls when redirection is enabled. The "BootLoader" option disables re-
direction until after booting to legacy operating system. The options are Always Enable
and BootLoader.
Legacy Console Redirection
Legacy Console Redirection Port
Use this feature to select a COM port to display redirection of Legacy OS and Legacy
OPROM messages. The options are COM1 and SOL.
104