Motherboard Features - Supermicro X11SPH-NCTPF User Manual

Table of Contents

Advertisement

Motherboard Features

CPU
Supports an Intel® Xeon 81xx/61xx/51xx/41xx/31xx series (Socket P0-LGA 3647) processor with up to 28 cores and a
thermal design power (TDP) of up to 205W
Note: The X11SPH-NCTPF/-NCTF motherboard does not support FPGA or Fabric processors.
Memory
Up to 256GB of RDIMM, 512GB of LRDIMM, and 1TB of 3DS LRDIMM DDR4 (288-pin) ECC memory with speeds of up
to 2666MHz in eight memory slots
Note: Memory speed support depends on the processors used in the system.
DIMM Size
Up to 128GB at 1.2V
Note: For the latest CPU/memory updates, please refer to our website:
erboard
Chipset
Intel PCH C622
Expansion Slots
One (1) PCI-Express 3.0 x4 (in x8) Slot (PCH SLOT2)
Two (2) PCI-Express 3.0 x8 Slot (CPU SLOT3, CPU SLOT5)
One (1) PCI-Express 3.0 x16 Slot (CPU SLOT6)
Network
X11SPH-NCTF: Intel X557-AT2 for Dual 10G BASE-T Ports
X11SPH-NCTPF: Inphi CS4227 for Dual 10G SFP+ Ports
One (1) Dedicated IPMI LAN located on the rear I/O panel
Baseboard Management Controller (BMC)
ASpeed AST2500 BMC
Graphics
Graphics controller via ASpeed AST2500 BMC
Note: The table above is continued on the next page.
Motherboard Features
15
Chapter 1: Introduction
http://www.supermicro.com/products/moth-

Advertisement

Table of Contents
loading

This manual is also suitable for:

X11sph-nctf

Table of Contents