Supermicro C9X299-PGF-L User Manual page 112

Hide thumbs Also See for C9X299-PGF-L:
Table of Contents

Advertisement

Super C9X299-PGF-L/-RPGF-L User's Manual
BMC Network Configuration
BMC Network Configuration
Update IPMI LAN Configuration
Select Yes for the BIOS to implement all IP/MAC address changes at the next system boot.
The options are No and Yes.
*If the feature above is set to Yes, the following features will become available for
configuration:
Configure IPV4 support
IPMI LAN Selection - Share LAN
IPMI Network Link Status - Shared LAN
Configuration Address Source
This feature allows you to select the source of the IP address for this computer. If Static
is selected, you will need to know the IP address of this computer and enter it to the
system manually in the field. If DHCP is selected, the BIOS will search for a Dynamic Host
Configuration Protocol (DHCP) server in the network that is attached to and request the
next available IP address for this computer. The options are Static and DHCP (dynamic).
*If the feature of the
features will be displayed:
Station IP Address
Subnet Mask
Station MAC Address
Gateway IP Address
*If the feature of the
features will become available for configuration:
Station MAC address
This feature displays the Station MAC address for this computer. Mac addresses are 6
two-digit hexadecimal numbers.
Station IP address
This feature displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Configuration Address source
Configuration Address source
112
is set to DHCP, the following
is set to Static, the following

Advertisement

Table of Contents
loading

This manual is also suitable for:

C9x299-rpgf-l

Table of Contents