Supermicro C9X299-PGF-L User Manual page 103

This feature controls the number of rows and columns supported by redirection on legacy
operating systems. The options are 80x24 and 80x25
Putty KeyPad
This feature controls Putty KeyPad support. The options are VT100, LINUX, XTERMR6,
SCO, ESCN, and VT400.
Redirection After BIOS POST
This feature controls when redirection is enabled. The "BootLoader" option disables re-
direction until after booting to legacy operating system. The options are Always Enable
and BootLoader.
SOL
Console Redirection
This feature enables Console Redirection for remote data exchange. The options are
Unchecked and Checked.
*If the feature above is set to Checked, the following feature will become available
for configuration:
Console Redirection Settings
SOL
Console Redirection Settings
Terminal Type
This feature controls the terminal emulation type. The options are VT100, VT100+, VT-
UTF8, and ANSI.
Bits per second
This feature controls the transmission speed of the host serial port, which must be
matched by the remote serial port. The options are 9600, 19200, 38400, 57600, and
115200.
Data Bits
This feature controls the data bits. The options are 7 and 8.
Parity
103
Chapter 4: UEFI BIOS