Supermicro C9X299-PGF-L User Manual page 100

Super C9X299-PGF-L/-RPGF-L User's Manual
Re-try Boot
When EFI Boot is selected, the BIOS will automatically reboot the system from an EFI boot
device after its initial boot failure. Select Legacy Boot to allow the BIOS to automatically
reboot the system from a Legacy boot device after its initial boot failure. The options are
Disabled, Legacy Boot, and EFI Boot.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
4 Seconds Override for you to power off the system after pressing and holding the power
button for four seconds or longer. Select Instant Off to instantly power off the system as
soon as you presses the power button. The options are Instant Off and 4 Seconds Override.
AC Loss Policy Depend on
Use this feature to set the power state after a power outage. Select "Power Off" for the
system power to remain off after a power loss. Select "Power On" for the system power to
be turned on after a power loss. Select 'Last State' to allow the system to resume its last
power state before a power loss. The options are Stay Off, Power On, and Last State.
EuP Support
EuP, or Energy Using Product, is a European energy-saving specification that sets a
standard on the maximum total power consumption on electrical products. The options are
Unchecked or Checked.
Setup Mode
This feature sets the default screen when entering BIOS setup. The options are
and Advanced Mode.
NCT6792D Super IO Configuration
NCT6792D Super IO Configuration
Super IO Chip - NCT6792D
Serial Port 1 Configuration
Serial Port 1 Configuration
Serial Port 1
This feature enables the Serial Port 1 (COM1). The options are Unchecked and Checked.
*If the feature above is set to Checked, the following feature will become available
for configuration:
Device Settings - IO=3F8h; IRQ=4;
100
EZ Mode