Dimm Installation; Dimm Removal - Supermicro C9X299-PGF-L User Manual

DIMM Installation

1. Insert DIMM modules in the following
order: DIMMA1, DIMMB1, DIMMC1,
DIMMD1, then DIMMA2, DIMMB2,
DIMMC2, DIMMD2. For the system to
work properly, use memory modules of the
same type and speed.
2. Align the DIMM module key with the
receptive point on the single-latch DIMM
slot.
3. Push the release tab outwards to unlock
the slot.
4. Align the notch on the end of the module
against the receptive point on the end of
the slot.
5. Press both ends of the module straight
down into the slot until the module snaps
into place.
6. Push the release tab to the lock position to
secure the module into the slot.

DIMM Removal

Reverse the steps above to remove the DIMM
modules from the motherboard.
JCOM1
MH15
BMC
JPB1
MH12
MH14
BAR CODE
B2 IPMI CODE
+
BIOS
LICENSE
MAC CODE
LED6903
LED6904
PCIE M.2 M-2
PCIE M.2-M1
JSTBY1
JBT1
LED7201
LED1
PCH
SP1
U.2-1 U.2-2
JLED1
1 I-SATA4 I-SATA2 I-SATA0
I-SATA5 I-SATA3 I-SATA1
Receptive Point
Release Tab
Push both ends straight
down into the memory slot.
33
Chapter 2: Installation
J3701
VGA
HD AUDIO KB/Mouse
USB 4/5(3.0)
LAN1
USB 8/9 (3.1) USB 6/7(3.1)
SYS_FAN3 SYS_FAN2
DIMMB1
DIMMB2
DIMMA1
DIMMA2
JPW3
LGA2066
JPW2
CPU_FAN1
DIMMC2
DIMMC1
DIMMD2
DIMMD1
JSD1
SYS_FAN1 CPU_FAN2
JPW1
JPI2C1
Notch