Supermicro C9X299-PGF-L User Manual page 102

Super C9X299-PGF-L/-RPGF-L User's Manual
COM1
Console Redirection Settings
Terminal Type
This feature controls the terminal emulation type. The options are VT100, VT100+, VT-
UTF8, and ANSI.
Bits per second
This feature controls the transmission speed of the host serial port, which must be
matched by the remote serial port. The options are 9600, 19200, 38400, 57600, and
115200.
Data Bits
This feature controls the data bits. The options are 7 and 8.
Parity
This feature controls whether parity bits are sent with data bits in order to detect trans-
mission errors. The options are None, Even, Odd, Mark, and Space.
Stop Bits
This feature controls the amount of stop bits to send at the end of a data packet. Slow
devices may require more than one stop bit. The options are 1 or 2.
Flow Control
This feature can prevent data loss from buffer overflow. The options are None and
Hardware RTS/CTS.
VT-UTF8 Combo Key Support
This feature enables VT-UTF8 Combo Key support for ANSI/VT100 terminals. The op-
tions are Unchecked and Checked.
Recorder Mode
This feature enables only text to be sent across consoles. The options are Unchecked
and Checked.
Resolution 100x31
This feature enables extended terminal resolution. The options are Unchecked and
Checked.
Legacy OS Redirection Resolution
102