8. Close the load plate with the CPU inside the socket. Lock the "Close 1st" lever first,
then lock the "Open 1st" lever second. Gently push the load levers down to the lever
locks.
1
Gently close the
load plate
3
Lever Lock
Attention! You can only install the CPU inside the socket in one direction. Make sure that
it is properly inserted into the CPU socket before closing the load plate. If it doesn't close
properly, do not force it as it may damage your CPU. Instead, open the load plate again
and double-check that the CPU is aligned properly.
Push down and lock
'Open 1st' lever
27
Chapter 2: Installation
2
Push down and lock
'Close 1st' lever
4
Lever Lock