GRAUPNER HOT TG/mz-12 Operating Instruction page 39

- Pitc->thro
Press the direction button to select pitc->thro line and press the ENT button to access the pitc-
>thro function. 0% of the point 1 value is highlighted. Move the throttle stick to the high position
step by step then the point 2,3,4,5 is selected in turn. After selecting the point number, press the
direction button to adjust the desired value. Press the ESC button to return to the previous screen.
NOTE : The default values of the point 2 and point 4 is remained not to be programmed so the
"deact" is displayed at the value box. You may activate and adjust the desired value by the direction
button if you want. When the value of the point 2 and point 4 are activated, the basic value of point 2
is 25% and point 4 is 75%
press
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
press
press
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
39