GRAUPNER HOT TG/mz-12 Operating Instruction page 62

- S-TRAVEL + / -
The maximum servo travel that is connected to slave channel can be programmed.
Press DOWN button to access to S- TRAVEL+/- line then press ENT button to highlight the
default value 00. Press UP/DOWN button to select the desired channel then press ENT button to
remove the highlight.
press
press
press
62
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT - RX WING MIXER TAIL TYPE
This function is used to set the proper tail type. You may select one type of Normal, V-Tail, Elev-
TEL VIW
on can be selected depending on the model type. Press DOWN button to access to RX WING
ESC
MIXER TAIL TYPE line then press ENT button to highlight the default value NORMAL. Press
UP/DOWN button to select the desired type then press ENT button to remove the highlight.
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
press
press
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC