GRAUPNER HOT TG/mz-12 Operating Instruction page 59

- F.S.POS.
It is used to set fail safe position at the desired channel that you select on OUTPUT CH.
Press DOWN button to access to F.S. Pos line then press ENT button to highlight the default
value 1500usec. Press UP/DOWN button to select the desired value then press ENT button to
remove the highlight.
press
press
- DELAY
This function allows you to set the time that failsafe takes to start under failsafe situation
Press DOWN button to access to DELAY line then press ENT button to highlight the default value
0.75sec. Press UP/DOWN button to select the desired value then press ENT button to remove
the highlight.
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
press
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
press
ENT
TEL VIW
ESC
ENT
TEL VIW
ESC
59