Record Schedule Configuration - Nuvico Xcel D-PL800 User Manual

DVR User Manual
Record & Disk Management
Set Week Schedule

Click and then click "Manual" beside to set the week schedule. Refer to the
or
picture below. Set the start and end time, check the days in the window and then click "OK" to
save the settings.
Click "All" to set all week recording; click "Reverse" to swap the selected and unselected time
in a week; click "Clear All" to clear all the selected area in a week.

7.3.2 Record Schedule Configuration

Click StartSettingsRecordRecord ScheduleSchedule Configuration to go to the
interface as shown below. Set the schedule of sensor record, motion record, timed record and
intelligence record. Click "None" in the drop-down menu to clear the schedule. Click "Apply"
to save the settings.
Go to "Edit Schedules" interface and then click to edit the schedule. The settings of
54