Pppoe Configuration - Nuvico Xcel D-PL800 User Manual

Device Management
Click "Create" to create the certificate request. Then download the certificate request and
submit it to the trusted certificate authority for signature. After receiving the signed certificate,
import the certificate to the device.
③ After the certificate has been installed, enable this function and apply it. Then the camera
can be accessed by entering https://IP: https port via the web browser (eg.
https://192.168.1.201:443).
Server Port: the default server port of the DVR is 6036. The server port number can be
changed as required. The port is mainly used in network video management system.
RTSP Port: RTSP real-time stream protocol can be used to control the sending of real-time
data. By media player which supports the RTSP real-time stream protocol, you can view the
live images synchronously. The default RTSP port is 554 and it can be changed as needed.
POS Port: the default POS port of the DVR is 9036.
Note: The HTTP port and server port of the DVR should be mapped to the router before you access
the DVR via WAN.

11.1.3 PPPoE Configuration

Click StartSettingsNetworkPPPoE to go to the interface as shown below. Check
"Enable" in "PPPoE Settings" and then enter the username and password obtained from the
dealer. Click "Apply" to save the settings.
96
DVR User Manual