Ddns Configuration - Nuvico Xcel D-PL800 User Manual

Device Management

11.1.4 DDNS Configuration

The DDNS is used to control the dynamic IP address through domain name. You can access the
DVR easily if the DDNS is enabled and configured.
Click StartSettingsNetworkDDNS to go to the interface as shown below.
Check "Enable" and then select the DDNS type. Enter the server address, domain name,
username and password according to the selected DDNS type. Click "Test" to test
the effectiveness of the input information. Click "Apply" to save the settings.
You will have to input the server address and domain name if some DDNS types are selected.
Go to the relative DNS website to register domain name and then input the registered domain
information here). Now we take www.xcelddns.com for example.
① Input www.xcelddns.com in the IE address bar to visit its DDNS website.
97
DVR User Manual