Buzzer; Push Message; Manual Alarm; View Alarm Status - Nuvico Xcel D-PL800 User Manual

Alarm Management

9.5.4 Buzzer

Click StartSettingsAlarmEvent NotificationBuzzer to go to the buzzer configuration
interface. Set the delay time of the buzzer and then click "Apply" to save the setting. You can
click "Test" to test the buzzer.

9.5.5 Push Message

Click StartSettingsAlarmEvent NotificationPush Message to go to the interface as
shown below. Check "Enable", choose the push schedule and then click the "Apply" button to
save the settings. If Push Server is online, it will push messages to the mobile clients.

9.6 Manual Alarm

Click on the tool bar at the bottom of the live view interface to pop up a window. Click
"Trigger" to start alarm. Click "Clear" to stop alarm.

9.7 View Alarm Status

Click StartSettingsAlarmAlarm Status or click on the tool bar at the bottom of the
84
DVR User Manual