Factory Default; Device Software Upgrade - Nuvico Xcel D-PL800 User Manual

Device Management
Manual: select "Manual" in the "Synchronous" option and then click
Time" option to set the system time.
NTP: select "NTP" in the "Synchronous" option and then choose the NTP server.

11.3 Factory Default

Click StartSettingsSystemMaintenanceFactory Default to go to the following
interface. Please choose the item as needed.
Note: Resetting to the factory default settings will not change time zone.

11.4 Device Software Upgrade

Common Upgrade

You can click StartSettingsSystemInformationBasic to view MCU, kernel version and
firmware version and so on. Before upgrade, please get the upgrade file from your dealer.
The upgrade steps are as follows:
① Copy the upgrade software (.tar) into the USB storage device.
② Insert the USB storage device into the USB interface of the DVR.
③ Click StartSettingsSystemMaintenanceUpgrade to go to "Upgrade" interface.
Select the USB device in "Device Name" option and go to the path where the upgrade software
104
DVR User Manual
after the "System