Record & Disk Management; Record Configuration; Mode Configuration - Nuvico Xcel D-PL800 User Manual

Record & Disk Management
7 Record & Disk Management

7.1 Record Configuration

7.1.1 Mode Configuration

Please format the HDDs before recording (refer to 7.5 Disk Management for details). Click
StartSettingsRecordMode Settings to go to the mode settings interface. You can set the
record time under the "Manual Record Settings" and then click "Apply" button to save the
settings. There are two record modes: auto mode and manual mode.
Auto Mode

Motion Record: Motion alarm record will be enabled when motion alarm happens.
Sensor Record: Sensor alarm record will be enabled when sensor alarm happens.
Motion Record+Sensor Record: Motion/sensor alarm record will be enabled when
motion/sensor alarm happens.
Always(24 7) Record+Motion Record: Normal record is enabled all the time; motion alarm
ⅹ
record will be started when motion alarm happens.
Always(24 7) Record+Sensor Record: Normal record is enabled all the time; sensor alarm
ⅹ
record will be started when sensor alarm happens.
Always(24 7) Record+Motion Record+Sensor Record: Normal record is enabled all the time;
ⅹ
motion/sensor alarm record will be enabled when motion/sensor alarm happens.
Always(24 7) Record+Motion Record+Sensor Record+Analytics Record: Normal record is
ⅹ
enabled all the time; motion/sensor/intelligence alarm record will be enabled when
48
DVR User Manual