Exception - Nuvico Xcel D-PL800 User Manual

Alarm Management
② Enable or disable "Record", "Snapshot", "Push", "Alarm-out", "Preset", "Buzzer",
"Pop-up Video" and "E-mail". The alarm handling setting of object detection alarm is similar
to that of the sensor alarm (see 9.1 Sensor Alarm for details).
③ Click "Apply" to save the settings. You can click "Object Config" to go to the object
detection configuration interface.

9.3.2 Exception

Exception Configuration:
① Click StartSettingsCameraIntelligent Analytics Exception to go to the following
interface.
② Select the camera and enable the relevant detection as needed.
Scene Change: Alarms will be triggered if the scene of the monitor video has changed.
Video Blurred: Alarms will be triggered if the video becomes blurry.
Video Color Cast: Alarms will be triggered if the video becomes obscured.
③ Set the sensitivity of the exception detection.
④ Click "Apply" to save the settings.
⑤ Click "Processing Mode" to go to the alarm handling configuration interface of exception
detection.
Exception Alarm Handling Configuration:
① Click StartSettingsAlarmIntelligence AlarmException to go to the interface.
77
DVR User Manual