Cruise Setting - Nuvico Xcel D-PL800 User Manual

Table of Contents

PTZ

Select camera and then click "Add" button to add preset; or click

the right side of the interface to display the preset information of the dome and then click

to add preset. The operations of the "Add Preset" window are similar to that of the

PTZ control interface; please see 6.1 PTZ Control Interface Introduction for details.

Edit preset



Select camera and preset. You can enter the new name of the preset and then click

save the new preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset

and then click "Save Position" to save the preset.

Delete Preset



Select camera and preset and then click "Delete" to delete the preset.

6.3 Cruise Setting

Click StartSettingsCameraPTZCruise to go to the interface as shown below.

Add Cruise



Click

in the camera list on the right side of the interface to display the cruise information

of the dome and then click

window are similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface

Introduction for details.

Edit Cruise



to add cruise. The operations of the "Add Cruise"

DVR User Manual

in the camera list on

Table of Contents