Disk Management - Nuvico Xcel D-PL800 User Manual

Record & Disk Management

7.5 Disk Management

Click StartSettingsDiskDisk Management to go to disk management interface. You can
view the DVR's disk number and disk status and so on in the interface. Click the "Format"
button to format the HDD.
Note: The new HDD should be formatted for normal use.
Some models may not support RAID function. The settings of RAID are as followings. Please
skip the settings of physical disk, array and disk mode if the DVR doesn't support this function.
RAID

① Enable RAID
(Go to StartSettingsDiskDisk Mode)
② Create an array. (Go to StartSettingsDiskPhysical Disk)
a. Click "Physical Disk" tab and then click "Create an array".
b. Enter the user name and password which has the authority of Disk Management. If you
don't have one, you can use the user name and password that you login system (the default
username: admin; the default password:123456).
c. Enter array name and select array type (like RAID5).
56
DVR User Manual