Encode Parameters Setting - Nuvico Xcel D-PL800 User Manual

DVR User Manual
Record & Disk Management

7.2 Encode Parameters Setting

Click StartSettingsRecordEncode Parameters to go to the interface as shown below. Set
the encode, resolution, FPS, bitrate type, quality, max bitrate and audio of main stream for each
camera in "Event Recording Settings" and "Schedule Recording Settings" interfaces. Click
"Apply" to save the settings. You can set the record stream of each camera one by one or set
them in bulk for all cameras.
Click StartSettingsRecordStream Settings to go to "Sub Stream" interface. Set the
encode, resolution, FPS, bitrate type, quality and max bitrate of sub-stream for each camera in
the interface and then click "Apply" to save the settings.
51