Scheme View In Sequence - Nuvico Xcel D-PL800 User Manual

DVR User Manual
Live View Introduction
Go to the live view interface and then click to pop up a little window. Set the dwell time
in the window and then click to view the live group by group according to the camera
number of the current screen mode. Double click the sequence view interface to pause the view;
double click again to restore the view. Click to stop the view.

5.2.3 Scheme View In Sequence

Click StartSettingsSystemBasicOutput SettingsMain Output to go to the interface
as shown below.
Area ① displays all the dwell schemes; area ② shows the detailed information of the scheme;
area ③ displays all the cameras; area ④ is the tool bar ( : clear button; : favorite button,
click it to pop up a window, enter the display mode name in the window and then click "OK" to
save the current display mode; other buttons are screen mode buttons).
31