Date And Time Configuration - Nuvico Xcel D-PL800 User Manual

Device Management
Set the device name, device No., language, video format and main output resolution. Enable or
disable wizard, "Log In Automatically", "Log Out Automatically" (if checked, you can set the
wait time) "App Live Self-Adaption" and "Dwell Automatically" (if checked, you can set the
wait time). Click "Apply" to save the settings.
Device Name: The name of the device. It may display on the client end or CMS that help user
to recognize the device remotely.
Video Format: Two modes: PAL and NTSC. Select the video format according to the camera.
Spot: If the DVR supports spot output, you can enable spot output. Connect the spot output
device to the DVR and then set the spot output (see 5.2.4 Spot View for details).
Dwell Automatically: Switch automatically. Check it and set "wait time".The system will
switch images automatically if it is not operated during the time you set.
Note: You can set the resolutions of the main output and secondary output respectively if the
DVR has dual outputs. Refer to the picture as shown below.

11.2.2 Date and Time Configuration

Click StartSettingsSystemBasicDate and Time to go to the interface as shown below.
Set the system time, date format, time format and time zone of the DVR. The default time zone
is GMT+08 Beijing, Hong Kong, Shanghai, Taipei. If the selected time zone includes DST, the
DST of the time zone will be checked by default. Click "Apply" to save the settings.
You can manually set the system time or synchronize system time with network through NTP.
103
DVR User Manual