Image Adjustment - Nuvico Xcel D-PL800 User Manual

Live View Introduction

5.4.5 Image Adjustment

Go to live view interface and then click
to go to the image adjustment interface.
Image Adjustment

Select the camera and then click "Image Adjustment" to go to image adjustment tab. Refer to
the above picture. Drag the slider to set the camera's brightness, contrast, saturation and hue
value. Check sharpen, wide dynamic and denoise and then drag the slider to set the value. Click
"Default" button to set these parameters to default values.
The introductions of these parameters are as follows:
Parameter
Brightness
Contrast
Saturation
Hue
Sharpen
Wide Dynamic
BLC
Denoise
It is the brightness level of the camera's image.
It is the color difference between the brightest and darkest parts.
It is the degree of color purity. The color is purer, the image is brighter.
It refers to the total color degree of the image.
It refers to the resolution level of the image plane and the sharpness level of the
image edge.
The wide dynamic range (WDR) function helps the camera provide clear images
even under back light circumstances. When there are both very bright and very
dark areas simultaneously in the field of view, WDR balances the brightness level
of the whole image and provide clear images with details.
HLC: lowers the brightness of the entire image by suppressing the brightness of
the image's bright area and reducing the size of the halo area.
BLC: If enabled, the auto exposure will activate according to the scene so that the
object of the image in the darkest area will be seen clearly.
Decrease the noise and make the image more thorough. Increasing the value will
make the noise reduction effect better but it will reduce the image resolution.
button on the tool bar under the camera window
Meaning
39
DVR User Manual