Table of Contents
Advertisement
5.2 Configuring Record Schedule
Set the record schedule, and then the camera will automatically start/stop recording according to the configured
schedule.
Steps:
1. Enter the Record Schedule interface.
Menu> Record> Schedule
2. Choose the camera you want to configure in the Camera dropdown list.
3. Check the checkbox of Enable Schedule.
4. Configure the record schedule.
Edit the schedule
1)
Click Edit.
2)
In the message box, you can choose the day to which you want to set schedule.
3)
To schedule an all-day recording, check the checkbox after the All Day item.
4)
To arrange other schedule, leave the All Day checkbox blank and set the Start/End time.
NOTE
Up to 8 periods can be configured for each day. And the time periods cannot be overlapped with each other.
Repeat the above steps 1)-4) to schedule recording for other days in the week. If the schedule can also be
set to other days, click Copy.
NOTE
The Holiday option is available when you enable holiday schedule in Holiday settings. See Chapter 5.6
Configuring Holiday Record.
5)
Click OK to save setting and back to upper level menu.
Draw the schedule
1)
Click on the color icon to select a record type in the event list on the right-side of the interface.
2)
Click and drag the mouse on the schedule.
3)
Click on the other area except for the schedule table to finish and exit the drawing.
You can repeat step 4 to set schedule for other channels. If the settings can also be used to other channels,
click Copy, and then choose the channel to which you want to copy.
5. Click Apply in the Record Schedule interface to save the settings.
37
Advertisement
Table of Contents
