Setup Panel - Nuvico Xcel D-PL800 User Manual

Wizard & Main Interface
Button
Introduction of area ②:
Click "Camera" to view all the added cameras in the camera list. Select one camera window on
the left side of the interface and then double click one IP camera in the list to preview the
camera image in the selected window.
Click "Customize Display Modes" to view all the display modes in the display mode list (refer
to 5.2.1 Display Mode for detail configuration of the display mode). Double click one display
mode in the list to switch to the display mode for previewing.
Introduction of area ③:
Icon / Button

3.2.2 Setup Panel

Click StartSettings to bring up the setup panel as shown below.
Alarm status button. Click it to view the alarm status.
Disk status button. Click it to view the disk status and RAID status.
Network status button. Click it to view the network status.
Information button. Click it to view system information, including basic
information, camera status, alarm status, record status, network status, disk
information, backup status and user status.
It shows the current login user.
Click it to go to record search interface, see 8.4 Record Search,
Playback & Backup for details.
Click it to go to playback interface (click
bottom of the live view interface to set the default playback time), see
8.2 Playback Interface Introduction for details.
Click it to pop up the setup panel, see 3.2.2 Setup Panel for details.
Click it to log out the system.
Click it and then select "Logout", "Reboot" or "Shutdown" in the
popup window.
21
DVR User Manual
Meaning
Meaning
on the tool bar at the